In stock
In stock
-
Rocks sold separately. You will need to order 3 boxes (20kg each) of rocks to go with this heater.
You will need to order a North American chimney adapter (4″ to 6″) for this product.
Need help finding the right heater for your sauna? Use our sauna calculator here.
$1,804.95
Harvia Pro 36
Great baths for great crowds.
The Harvia Pro 36 is a power stove for big saunas. Its characteristics provide enough power to make bathing comfortable, even for a big crowd. The large number of stones means that you can spend more time bathing in the sauna. The heat won’t run short, even if the fire dies down in the stove. The air-flow spoiler is made of stainless steel. The adjustable legs make the stove easy to place in the sauna.
The outer casing of the stove is painted graphite black. It can be equipped with a pipe mounted water heater.
The size of the sauna room is 494-1271 cu. ft. (14–36 m3) and the maximum amount of stones is 132 lbs (60 kg).
| Model | WK360 |
| Sauna room min. cu. ft. (m3) | 494 (14) |
| Sauna room max. cu. ft. (m3) | 1271 (36) |
| Stone capacity max. lbs (kg) | 132 (60) |
| Dimensions width in (mm) | 20 (510) |
| Dimensions height in (mm) | 31 7/8 (810) |
| Dimensions depth in (mm) | 20 (510) |
| Weight lbs (kg) | 154 (70) |
| Heater output kW | 31 |
| Safety distance to sides and back, masonry walls E, in (mm) | 2 (50)* |
| Safety distance to sides (B) and back (C), walls and benches made of inflammable materials, in (mm) | 19 5/8 (500) |
| Safety distance to front (D) in (mm) | 19 5/8 (500) |
| Safety distance from upper surface to ceiling A min. in (mm) | 49 1/4 (1250) |
| Fire chamber cover in (mm) | 1/4 (6) |
| Location of smoke outlets at rear: from floor to centre of hole in (mm) | 26 3/4 (680) |
| Location of smoke outlets on top: from rear edge to centre of hole in (mm) | 5 1/8 (130) |
| Diameter of smoke outlet in (mm) | 4 1/2 (115) |
| * Leave 2″ (50 mm) between the stove and walls, provided that the air can circulate in front and to one side of the stove. If the stove is installed in a recessed wall, leave 4″ (100 mm) between the stove and walls for the air circulation. |
Read and follow at all times the Harvia Instructions for installation and use
| Weight | 145 lbs |
|---|---|
| Dimensions | 23 × 22 × 35 in |
You may also like…
In stock
The water tank of the pipe model (22 l) is mounted directly onto the stove. The pipe-mounted water heater gets its heat energy from the hot combustion gases of a wood-burning stove, which are conducted to the chimney through the smoke pipe in the heater. As the pipe model is an efficient and fast water heater, water usually starts to boil when the stove is heated. To prevent boiling, remove some of the warm water from the heater and replace it with cool water. The heater should always be kept as full as possible. Fits all Harvia woodburning stoves except Harvia 50.
Read More
In stock
The Harvia steel chimney with accessory kit is a stylish, stainless steel chimney solution that is easy to install. The steel chimney withstands extensive changes in temperature and has mainly been designed for use with wood-heated wood burning heaters, smaller fireplaces and iron wood burning heaters in detached sauna buildings. The standard delivery of the steel chimney includes the steel chimney and a utility box with 1.0 m of non-insulated smoke pipe, a rain cap, a rubber rain flange and an installation set for the rain flange, a stainless steel lead-through flange for the ceiling and a lead-through insulation and protector. Thanks to an ingenious joint mechanism, the steel chimney can easily be extended. Choose top-of-the-line Harvia quality.
Read MoreRelated products
